Change language:

Controllers » Cabinet LX308 High end

Cabinet LX308 High end


Cabinet LX308 is designed for high end lifts that such hospitals and can handle traffic up to 8 lifts with an unlimited number of floors, fully implemented CANopen Lift support. 2x CAN interfaces, CAN1 for basket, CAN2 for excavation. Drive systems from Ziehl-Abegg. The cabinet has the standard dimensions 1000x800x300 and can be delivered either with the drive in the enclosure (up to 40A) or on the side.

LX308, a control system that will meet all possible requirements for flexibility whether in single lift or group lift in traffic. 
The system can handle up to 8 lifts in the group, with a maximum of 64 stores and control of the four-door machines. 
Apart from features and additions the only thing needed is one car cable, and in combination with any of our floor display or IO cards a minimum number of leaders in the shaft trunk is required. 
LX308 Supplied as standard with: 
  • Minimum 10 spare terminals in enclosures and car roof box 
  • Object labeled schematics 
  • Document Holder 
  • Cabinet Plan 
  • Degree of protection IP21 1000x800x300 
  • Double doors 
  • Fuse Panel 
  • Cabinet Lighting 
  • Cabinet Fan 
  • Breaker 10A 30mA 
  • Wall mount "hook assembly" 
  • Fitting / Återkörningsdon with 3M cable 
  • Positioning AWG absolute encoder for toothed belt 
  • Car roof boc with basket CPU CANopen-Lift 
  • Basket Cable flat 
  • Drive systems Ziehl-Abegg 

Hisselektroniks apparatus set can be supplemented with a variety of options from our range, self-made lift telephones, floor displays and other electronic components, and a selection of quality products, such as automatic doors, panels, frame locks, door switches and lift equipment from our Partners. 

Hisselektroniks control systems can be distinguished by the following points: 

  • 8 lifts in the group without additional computer group. 
  • Shaft information with CANopen Lift absolute encoders. 
  • Top plane up to 15 mm. 
  • Interface to the frequency control CANopen lift. (DCP03-04 are available on request). 
  • Service interval adjustable relative to the starter, change of direction, operation time and periodic dates. 
  • Remote monitoring and fault diagnostics with software WinMOS ® 300 over 3G, 4G, or Ethernet. 
  • Power management "Blue Modus" in 7 steps. 
  • Direct approach to floor and optimized körkurva independent of the distance between the planes. 
  • The number of cables is increasing not be it for 2 storey or group control of up to 8 lifts and 64 storeys. 
  • CANopenLift CiA 417 is an open standard for lifts and enables other vendors' products can be connected to the same CAN bus.
Recommended accessories
This product does not have any recommended accessories.